Springtime Foils – Adore You

My husband is an incurable romantic – how lucky am I?  While I have made him masculine cards I know how much he loves the rich colors that can be found in flowers.  So when I saw the new Sale-Bration Springtime Foils DSP I knew right away there was a card in it for him.  And, I got to use the Blends, so who can beat that?

adore you w

I started with a card base of Melon Mambo cardstock (115320) cut 4-1/4″ x 11″, scored and folded at 5-1/2″ and set it aside.  Next, I just couldn’t wait to get out the Stampin’ Blends (147475) and have some fun coloring.  I cut a 3-1/4″ x 5-1/4″ piece of the gorgeous rose-patterned Springtime Foils Specialty DSP (147193)  and used Calypso Coral light and dark Stampin’ Blends (144045) to color in the roses.  I also used Old Olive light and dark Stampin’ Blends (144597) to color in the leaves.  Very easy and just look at how rich and gorgeous they look against the gold foiling.

I am still having a love affair (shh, don’t tell hubby) with the Painted with Love Specialty DSP (145580) and cut a 1-1/4″ x 5-1/4″ piece for the left side of the card.  The colors are so soft and beautiful and add some depth to the overall piece.

I needed to add a sentiment but didn’t want anything taking away from the foiled paper so I die cut a heart using the Lots to Love Box Framelits (145653) die from a scrap of Shimmery White cardstock (101910) .  I then heat embossed the floral images from the Petal Palette stamp set (145788) using Versamark ink (102283) and Gold Stampin’ Emboss Powder (109129) .  I colored them in with the same colors used on the foiled DSP.  The sentiment is from the Graceful Garden stamp set (143849) and was stamped using the Calypso Coral Classic Stampin’ Pad (126983).

To assemble the card, I adhered the two pieces of DSP to each other using Fast Fuse Adhesive. To cover the seam, I cut a 6″ piece of Gold 3/8″ Metallic Edge Ribbon (144146)  wrapped down the seam and adhered each end to the back using a glue dot.  I used the same ribbon to tie a small bow and adhered that with another glue dot.  The heart is popped up using Stampin’ Dimensionals (104430) and  the front panel attached to the card base using Fast Fuse.

I hope you enjoyed the card and will give it a try.  Hubby absolutely loved it!  As always, should you need any of the supplies mentioned above, just click the Shop Now button in the upper right corner or click here.

Have a great weekend!

Falling in Love

I love Valentine’s Day because of all the wonderful ways of expressing how we feel towards friends, family and loved ones.  It’s also a time when I made lots of cards, treat holders and other love-themed projects.

Today’s card is pretty clean and simple.  The large amount of white space really helps show off the pretty paper used for the heart die cuts.  Let’s talk about how it is made.

lovely valentine w

The card base is A2 size, 4.25″ x 11″ scored and folded at 5-1/2″  I cut it from a sheet of Powder Pink card stock (144244) as I wanted something subtle so as not to take away from the focal image.  The focal panel is a piece of 4″ x 5-1/4″ Whisper White card stock (100730).  I stamped the sentiment from Beautiful Bouquet stamp set (143666) using Versamark ink (102283), covered it with Gold Stampin’ Emboss powder (109129) and set it with the Heat Tool (129053).

The hearts were made using Painted with Love DSP (145580) and Color Theory Memories and More (144210) paper cut out using the Lots to Love Framelits Dies(145653).  Before adhering them to the card front panel, I laid them out to see where to stamp the flourish from the Beautiful Peacock stamp set (147239).  Once I had the placement correct, I inked up the flourish stamp in Calypso Coral ink (126983).  For a bit of variety I then reinked just the top half of the flourish stamp with Melon Mambo (126948) and stamped over the top of the original one.  Love the depth it gives this “tail.”  I then stamped the little flowers from the Beautiful Peacock stamp set (147239) using Versamark ink (102283), Gold Stampin’ Emboss Powder 109129) and heat set it with the Heat Tool (129053).  The centers of the flowers are Pearl Basic Jewels (144219) colored with Stampin Blends in Calypso Coral Dark (144044) and Rich Razzleberry Dark (144583).

Now I was ready to adhere the hearts.  The purple one is glued down with Multipurpose Liquid Glue (110755) and the pink/gold one is propped up using Stampin’ Dimensionals (104430).

For the inside of the card, I stamped the coordinating sentiment from the Beautiful Bouquet stamp set (143666) using Melon Mambo ink (126948) onto a 4″ x 5-1/4″ panel of Whisper White card stock (100730).  I then adhered it to the card using Multipurpose Liquid Glue (110755).

And there you have it!  This card also works for weddings and anniversaries.  I hope you will give it a try.  As always, if you have any questions at all bout how it is made just drop me a comment below.  If you need to order any supplies, you can click on the Shop Now button in the upper right corner or click here; that will take you right into my store.  Ta for now!

Love – for the Inkin’ Krew Blog Hop

Hot ‘lanta has frozen over!  While we have been spared the snow that the rest of the East Coast seems to be getting, I haven’t seen temps this cold since I left Colorado – even Ms. Wynnie is spending nights indoors.  The upside is that I get to spend time in my warm, cozy craft room just in time for this month’s Amy’s Inkin’ Krew Blog Hop!  Yay!

blog header

There were two suites in the new catalogs that I immediately fell in love with – Sure Do Love You and Petal Palette.  Can you say gorgeous?  And with Valentine’s Day just around the corner I decided to find a way to use both suites together.  I had viewed a great YouTube video on how to make a concertina wallet filled with love bombs and decided to give it a go.  This little wallet really packs a lot of love as you can see from the pic below.

Love blog

Sweet, right?  The wallet is so easy to put together and the 4 little “bombs” took no time at all.  It is also very frugal on DSP which made it easier to cut into that wowza paper rather than hoarding it (c’mon, you know y’all do that too).  So how is it made?  Rather than totally reinvent the wheel, I am going to point you to the very same YouTube video I watched:  Love Bomb Concertina Wallet.  Sam (Pootles Papercraft) is one of my favorite YouTubers and I know you will enjoy her video.

To stay with my Valentine’s theme, I used two 6 x 6″ pieces of Powder Pink card stock (144244).  I then scored, trimmed and folded just like in the video.  I used Tear and Tape adhesive (138995) to connect the sides.  This paper is thick so wanted to make sure of a good hold.  I then took two pieces of the Painted with Love Specialty DSP (145580) cut 2-3/4″ square and adhered one to the front and one to the back using Multipurpose Liquid Glue (110755).  I used a paper punch for a small hole on both the front and back, then threaded Powder Pink Finely Woven Ribbon (144134) through the front hole, wrapping around to the back and out through that hole.  This makes for a neat way to close your wallet when full.  I then stamped the sentiment from Petal Palette stamp set (145785) in Melon Mambo ink (126948) on Whisper White card stock (100730).  I also stamped one of the little florets from that stamp set in Calypso Coral ink (126983).  I then cut this out using one of the ovals from the Stitched Shapes Framelits (145372).  This was adhered to the front using Stampin’ Dimensionals (104430).  Isn’t it adorable?

love blog 2

Now that the wallet was done, I needed some love bombs for the inside.  This will hold four of them nicely.   Two were cut from Whisper White Cardstock (10073) and two from the Painted with Love Specialty DSP (145580).  I stamped the bouquet from Petal Palette stamp set (145785) in Calypso Coral ink (126983) on a 2-3/4″ square of Whisper White.  For the next one, I stamped the sentiment from Sure Do Love You stamp set (1415763) again in Calypso Coral ink.  This was cut out with the die from the Lots to Love Box Framelits Dies (145653).  I attached this to a 2-3/4″ square piece of the Painted with Love Specialty DSP using Multipurpose Liquid Glue.  For the third one, I stamped the sentiment from Petal Palette stamp set (145785) using Melon Mambo ink onto a scrap piece of Whisper White.  I then used the 1-3/4″ Circle Punch (119850) to punch this out and attached it to another piece of the Painted with Love Specialty DSP.   The last love bomb has a sentiment from Eastern Beauty stamp set (143675) stamped in Melon Mambo on a 2-3/4″ square of Whisper White.  I then used the Decorative Ribbon Border Punch (143721) on the last little scrap of DSP and adhered it to the bottom using Multipurpose Liquid Glue.  And that was that!  Below is a close-up pic of how they turned out.

love blog 3

And there you have it!  Little love bombs in a pretty wallet to give to that someone special.  Let me know if you have any questions on how this went together and if you need supplies to make your own, I would sure love to have you order them from me.  Just click the Shop button in the upper right corner and it will take you right to my store.  As always, feel free to “bomb” me with any questions you might have.  This really is a simple project to do and so much fun!

Now on to the rest of the Hop!  You can click the Previous or Next buttons or click on the links in the list below to get to each artist.

previous blog button       next. blog button